Installation of the new door might improve the look of your property, make it more secure and energy-efficient, and also provide some additional privacy to the household. However, despite having a good quality door, its improper measurement or installation without prior preparation might bring you some trouble. Each step of the process is important. With proper planning and quality materials from Specialty Doors, homeowners and builders will be able to get a professional result and have a door for many years.
Measure the Opening Correctly
Accuracy is very important for the door installation process. You need to measure the width of the opening on three levels: on top, on the middle and on the bottom. The height of the opening must be checked on two sides and in the middle. The depth of the door jamb is required to be checked as well. The smallest measurements should be used in case of having an uneven opening. In addition, the squareness and the level of the frame should be checked as well. Don’t forget about accounting of the door frame, hinges, floor and clearances.
Choose the Proper Door for Your Room
Selection of the door should be done taking into consideration not only its look but also such factors as its function, location, necessity in privacy and its expected behavior. Wooden flush panel doors are suitable for bedrooms, living rooms, and offices as they have a clean and versatile look which can fit different interior designs. If there is a need in acoustic privacy for the space, such doors as acoustic doors in Melbourne will be appropriate for the office and meeting rooms. For entrance exposed to different weather conditions, it is possible to use metal external doors in Melbourne. Specialty Doors is a custom door manufacturer in Victoria, Australia.
Prepare the Frame for the Door Installation
Proper preparation of the frame is very important in order to guarantee easy door operation. All the obstructions should be removed. Existing jamb should be checked and the frame should be cleaned and ready for installation. Damaged or warped frames should be repaired before installation of the door. With the help of spirit level, you can check that the jamb is vertical and the head is level. Shims can be used to fix the alignment and keep the spacing consistent. Fix the frame according to the manufacturer’s installation instructions.
Install the Hinges and Hardware Carefully
According to the manufacturer’s recommendations, hinges should be placed. It is very important to make sure that hinge recesses were cut accurately and screws were fitted securely. Otherwise, the door might sag or it won’t close evenly and tightly. After hanging the door, test its operation several times to make sure that it operates smoothly without hitting the frame and floor. Handles and locks should be installed carefully in order to make sure that latches are operating correctly.
Check Sealing and Finishing of the Door Installation
Before finishing of the installation process, it is necessary to check gaps between the door and the opening and make sure that it closes properly. Suitable sealing can help to protect the room from draughts, dust and moisture. External doors should have appropriate sill and threshold detailing. Follow the instructions of the product installation and contact a professional installer if any changes of structures are needed.
Choose Good Quality Doors for Your Property
The success of the installation process depends on such factors as proper measuring, preparation of the frame, use of suitable materials and finishing. Specialty Doors company, which is situated in Victoria, Australia, provides doors delivery all over Australia, including Melbourne, Sydney, Adelaide, Gold Coast and Geelong. With proper selection of the door and correct installation, it will give you a long-lasting result.